 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Fast recovery diode RF2001T4S Applications General rectification Dimensions (Unit : mm) Structure 4.50.3 0.1 1.2 1.3 0.8 (1) (2) (3) 5.00.2 Construction Silicon epitaxial planar 8.00.2 12.00.2 13.5MIN 15.00.4 0.2 8.0 Features 1) High reliability.(TO-220) 2) Low noise. 3) Very fast switching . 10.00.3 0.1 2.80.2 0.1 (1) (2) (3) 0.70.1 0.05 2.60.5 ROHM : O220FN Manufacture Date Symbol VRM VR Io IFSM Tj Tstg (*1)Business frequency, Rating of R-load, Tc=94CMAX. Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current (*1) Forward current surge peak (60Hz/1cyc)(*1) Junction temperature Storage temperature Absolute maximum ratings (Ta=25C) Parameter Limits 430 400 20 100 150 -55 to +150 Unit V V A A C C Electrical characteristic (Ta=25C) Parameter Forward voltage Reverse current Reverse recovery time Symbol VF IR trr Min. - Typ. - Max. 1.6 10 30 Unit V A ns Conditions IF=20A VR=400V IF=0.5A,IR=1A Irr=0.25*IR www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.03 - Rev.B RF2001T4S Electrical characteristics curves Data Sheet 100 Ta=75C Ta=125C FORWARD CURRENT:I F(A) 10 Ta=25C Ta=150C 1 Ta=-25C 1000000 Ta=150C 100000 REVERSE CURRENT:IR(nA) Ta=125C 1000 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(pF) 10000 Ta=75C 1000 Ta=25C 100 Ta=-25C 100 0.1 10 0.01 0 200 400 600 800 1000 1200 1400 1600 1800 FORWARD VOLTAGE:V F(mV) VF-IF CHARACTERISTICS 1 0 50 100 150 200 250 300 350 400 450 REVERSE VOLTAGE:VR(V) VR-IR CHARACTERISTICS 10 0 5 10 15 20 25 30 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 1600 Ta=25C IF=20A n=20pcs 1500 500 450 REVERSE CURRENT:IR(uA) 400 350 300 250 200 150 100 50 0 VF DISPERSION MAP AVE:55.8nA Ta=25C VR=400V n=20pcs 500 Ta=25C f=1MHz VR=0V n=10pcs FORWARD VOLTAGE:V F(mV) 480 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 460 440 AVE:442.1pF 420 1400 AVE:1399mV 1300 400 IR DISPERSION MAP Ct DISPERSION MAP 300 RESERVE RECOVERY TIME:trr(ns) Ifsm 1cyc 8.3ms AVE:236.0A 30 25 20 AVE:22.6ns 15 10 5 0 trr DISPERSION MAP Ta=25C IF=0.5A IR=1A Irr=0.25*IR n=10pcs 1000 Ifsm PEAK SURGE FORWARD CURRENT:I FSM(A) 8.3ms 8.3ms 100 1cyc PEAK SURGE FORWARD CURRENT:I FSM(A) 250 200 150 100 10 50 0 1 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 IFSM DISPERSION MAP 1000 100 Ifsm IM=100mA 50 IF=1A Rth(j-a) FORWARD POWER DISSIPATION:Pf(W) 45 40 1ms D=1/2 DC Sin(=180) PEAK SURGE FORWARD CURRENT:I FSM(A) t TRANSIENT THAERMAL IMPEDANCE:Rth (C/W) time 300us 10 35 30 25 20 15 10 5 0 100 1 Rth(j-c) 10 0.1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 1 100 0.1 0.001 0.01 1 10 TIME:t(s) Rth-t CHARACTERISTICS 0.1 100 1000 0 10 20 30 40 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) Io-Pf CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.03 - Rev.B RF2001T4S Data Sheet 50 45 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 40 35 30 D=1/2 25 20 15 10 5 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE:Ta(C) Derating Curve"(Io-Ta) Sin(=180) DC T 0A 0V t Io AVERAGE RECTIFIED FORWARD CURRENT:Io(A) VR D=t/T VR=200V Tj=150C 50 45 40 35 30 25 20 15 10 5 0 0 25 50 Sin(=180) D=1/2 DC 0A 0V t T Io VR D=t/T VR=200V Tj=150C 30 No break at 30kV ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 No break at 30kV 20 15 AVE:8.8kV 10 5 0 75 100 125 150 C=200pF R=0 C=100pF R=1.5k C=150pF R=330 CASE TEMPARATURE:Tc(C) Derating Curve"(Io-Tc) ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 3/3 2010.03 - Rev.B Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RF2001T4S10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |